Showing posts with label Painting. Show all posts
Showing posts with label Painting. Show all posts

Thursday, June 18, 2009

Basic Painting Questions

So there's been an eager new troll player that's just starting to paint, and he/she has been asking me questions through PMs on Dakka. I figure I might as well post up my answers here in case anyone is wondering about the same questions as well. Plus I think one of my answers will be pretty long...

Q: How do you do the skin on your trolls?
A: Here's an old post where I talk about painting the skin:
http://datrollcave.blogspot.com/2007/02/painting-maulerbegin.html

I've since sped up the process though to cut out the regal blue and electric blue steps. I now base with GW electric blue (also available as the same color in Vallejo) and mix in more and more space wolf grey as I highlight/blend up.

Usually around 3 steps for infantry, and probably about 6 steps for beasts. I'll then sometimes do a very very watery wash of electric blue again in the crevices only (i.e. use your fine detail brush and get a very watered down electric blue droplet).

Q: How do you do the leather?
A: This one is a little tougher to answer for me as I don't have a very standard process. I'll break it down into the various types of leather I've done:

Cowhide/White Leather: This was done on the impaler and you can read about it here.

Yellow/Brown Dirty Leather: Can also be found on the impaler post above.

Red/Brown Leather: This is (surprise) also on the impaler, but I use it on the Axer, and Grim Angus as well (Better pics of leather here). The painting process I used is found here.

Champions Leather Bits/Kilt: For these guys, I used a similar technique, but with more steps. I based in good ol' Scorched Brown (GW), lay down a layer of Bloodtracker Brown (P3), and then Highlight with Beast Hide (P3). Then I washed with brown ink and re-highlighted with beast hide. This was really fast and easy and for a unit of them, I didn't want to spend a ton of time on them.

For the unit leader's eye-patch I spent a little more time on it and highlighted with Bleached Bone (GW) also.

Q: What's your definition of a wash?
A: For me, a wash usually consists of a drop of paint on my brush and then dipping my brush in a clean cup of water (very rapidly). One dip for a dark wash (i.e. if I want some heavy shading in the crevices), two or three dips for a very watery wash. It's not a very scientific method, but it works for me. The first time doing this during a paint session, I'll usually test it on a piece of paper to make sure the consistency is right before applying it to the model.

Q: How do you mix paint and water without wasting a lot of paint? (you dont really know how much you need when you pour some out do you?)
A: I kind of don't have this problem due to the weird way I paint.

I don't really use a mixing pallette (tiles or those plastic paint trays). I've found that the paint dries quickly on those anyway and I actually end up wasting more paint than if I just do things my own way.

What way is that? Well I get some standard computer paper, and basically use that as my pallette. Le gasp! I know tons of people swear by tiles, or pallettes, but they just don't work for me. I've found that while using paper does make paint dry quickly, it's not much more quickly than if I were to use a painting pallette. This is mostly because I'm very very slow at painting, so regardless of what I use, my paints dry out by the time I go back to the pallette.

The other benefit of using computer paper (aside from being cheap, plentiful, and requiring no cleanup), is that as I do a lot of watery painting, I find that it has just the right absorbancy for my tastes. I don't want it to suck up too much water when I dab my brush on it to get rid of excess water. Brown paper, newspaper, paper towels, tissues, and the like all suck up too much water. Whereas tiles, palletes, and print magazines all wick away too little water if I have too much. Computer paper works great for this purpose.

So if my paint is always drying out on the paper pallette, how do I avoid wasting paint? Well, I basically only put as much paint as I need for one application at a time. So basically dip brush in paint, dip brush in water, wick away excess water on pallete (and check color at the same time) and then apply to model. Then I wash brush quickly, and repeat. For blending two colors, I add the first color to the paper, and immediately after, I dip the brush in the other color and add it to the paper. Then I use the brush to mix to my desired color, add some water if needed, and apply to model.

Keep in mind when I say I dip my brush in the paint, I'm talking about a drop of paint. Not a huge glob. So I end up using/wasting little paint. Just as a point, in painting all my trolls so far, I have yet to use up more than half of a GW pot of electric blue! While BrokenZealot kindly bequeathed to me his in case I ever run out (it's a discontinued color now) I've yet to pop it open except to move it to a new container.

Also, while this might seem slower, I've gotten quite fast at doing things like this, especially the skin. I can crank out a champion's skin now in about 15-20 min (that's fast for me ok! :P)

For non-watery coats, or non-blended painting (i.e. basecoats), I just paint directly from the paint pot, onto the model.

Whew that was a long and complicated answer! I'm not sure it will be helpful to anyone, as it's a pretty weird way of doing things, but it works for me, so I'm not about to change heh.

If anyone has any other questions about how I do things, feel free to drop a comment and I'll try to answer best I can.

Sunday, June 14, 2009

New puppy

A bit of non-Troll related news, but my wife and I are finally getting a dog. Yay! She's watched me work on this blog over the years and thought it'd be fun if she gave it a go. So we've decided to blog about our puppy as we raise him. If any are interested it can be found here:

Our new puppy blog

In other news, skin on my Fell Caller is done. I'll hopefully finish him off during the work week this week. I'm still debating whether to attempt NMM again or just do regular metallics.

Saturday, May 23, 2009

Champions Fully Painted!


Yay all finished! Here they are in a lineup. They still need to have grass added to their bases (and some rocks painted grey), but overall they're pretty much done.

For those wondering, yes, that one on the left in the group photo is in fact "flying" through the air. There were a number of times that I've thrown my surefooted champs as missiles so I thought it was appropriate. Plus, when I made him, the movie 300 had just been released, so it was a fun re-pose based on the guy that flies through the air in the movie to hack off the Persian emissary's arm.

Here is a closeup of the Kithkar:

It took me a while to get used to painting their skin again, but I think I've got it down again.

I was debating between doing the little bumps on his chin in a darker color as in the Metamorphosis art (Dark Blue) but I couldn't make up my mind so just left them light blue for now. It will be an easy change if I do decide to do that though.

Also, I decided against doing a tartan design for now, though I could add one in the future as the brown cloth is pretty neutral and could easily be converted into a tartan.

I just noticed when I posted this pic that I've forgotten to paint the wooden handle on the Kithkar's axe. Oops. I'll fix that later tonight. Not sure how I missed it, but staring at the same models for hours tends to have that effect on me...where I selectively ignore things about the model while working on other parts, then forget to come back to it.

Also, I'm not a huge fan of how the axes came out for the Kithkar, whereas I'm fairly happy with the weapons for the other members of the unit. I don't like how the axe highlights came out on the Kithkar's axe, and the bronze bolt-on part didn't come out with enough contrast. This is where I suppose NMM techniques would have made a big difference, as it's easier to make gold/bronze metals "pop" like I did with Grim's weapons.

If you look closely, I added a bit of rust/dirt to their armor with a brown ink wash, but it didn't come out quite as well as I had hoped. Still for a quick application, I suppose it gets the job done without me spending a lot of time on it. The other added benefit is that it gives a slight brown tint to the armor, so it doesn't look as "shiny" and looks more weather worn to me.

Friday, May 22, 2009

The second thing to go is your memory...

So I forgot how to paint gems...had to look this up on the web again. I'm going to post this here for my own future reference. Heh.

Finished the Champions

Finished, minus basing and four gems. Yay!

I'm going to try and finish the gems tomorrow, get some pics, and maybe start on either the Krielstone bearer or the Fell Caller.

Tuesday, May 19, 2009

"Sandy" Primer

Well crap. So I took a closer look at the guys I primed a few days ago and apparently they all have this "sandy" feeling quality to them. I'm not sure why this is...maybe the primer is no good anymore? Maybe it was too hot when it was drying? Whatever the reason, it's left a very rough primer coat on them. The primer also seems to flake off the models fairly easily if I run my finger over it...

I'm not really sure what I should do now...I'm worried that if I paint over it, it may not look as nice...and it might flake off. But then again, maybe if I paint over it, the acrylic paints will "fill in" and smooth out the sandy texture...then I could just seal it as normal...

Darn Arizona heat (if that's the culprit)!

EDIT:

So it seems that fortunately the mauler extreme and the Long Riders mostly escaped the "powdery" fate. Thank goodness for that. The Pygs seemed to have gotten the worst of it...and I can live with that. Borka and Keggy were mostly ok too...just some bad spots which I'll just hand prime over I suppose.

On a side note, the weather hear has been crazy. Today it rained...yep, rain, in the middle of the desert, while it was 87F outside. Go figure...

Monday, May 18, 2009

Did some painting and priming today

So I got up early this morning (on a vacation day no less :/) to prime a bunch of my trolls. It's been incredibly hot lately and I knew I'd have to do it early before it got too hot. Even at 7 in the morning it was already 85F out. Yikes. I had a lot of trouble with my old GW Black Primer...which seemed to have gotten clogged over the year or so since I last used it. After a lot of cleaning I finally got it working though. So the things I got primed were:

Borka and Keggy
Long Riders
Pyg Burrowers
and last but not least, the Mauler Extreme...oh yea!

I also did some more painting on my champions. I've just got one guy left to do now, and some final details on the others. The last guy should be fast though since he has very little skin and is mostly just armor.

It's about 105F right now...so I think I'm going to like down in a corner of my tile floor and try not to melt...

Saturday, April 18, 2009

Worked on my champions a bit

I spent about an hour or two working on my champions today. I started base coating the skin on the other three. Two of them are pretty much done now except for some fine details and their tartans. I still am not sure how to do these, so I may just experiment randomly tomorrow. I'm thinking about going with an orange/brown base, with blue, white and red smaller lines. We'll see how it goes...probably poorly hah!

As a side note, I also had to re-learn how to do armor properly. I completely forgot that I need to wash the silver armor with a black ink/watery base before highlighting. The rediscovery today was funny, but also sad. I wonder what else I've forgotten in the last year!

In other news...I'm really tempted to start up a Cygnar army...I'm not really sure why though...might be all the Mk II talk on the forums. That and I've always thought it'd be nice to have a Warmachine army too.

Sunday, April 5, 2009

Champions...some progress

So I didn't quite make my painting goal, but I managed to squeeze in a couple hours of painting today. This weekend was pretty jam packed as I have a presentation on Wednesday, and was working on a procurement model for a simulation I'm doing. My entire Saturday disappeared into the depths of an excel spreadsheet.

Anyway, I did get the armor for one done, and the armor for the other basecoated. I also finished up their eyes and mouths. I tried to do a rusty armor wash for the one on the left, but it didn't come out quite right. I'll probably have to revisit him with a once over again later. But since I'm just shooting for tabletop quality with these, I'm not too worried.

I've definitely taken a step backward in painting ability...hopefully it will come back quickly, but it's why I wanted to start with some troopers I guess....to work all the bugs and rediscovery process out of my system.

As a side note, I still hate GW screw cap paint pots. A bunch of my paints completely dried out. Blargh! I'm going to need to buy some new paints when time permits.

On another side note, my wife did some mini painting with me today too. That was fun and nice. She started painting up an old cryx bonejack a college buddy bequeathed to me a long time ago (when the Warmachine battlebox first came out). If you're reading this, it's not too late to pick up Hordes/WM! You know who you are! ;)

Monday, March 30, 2009

Champions starting point...

So, as promised here is the starting point of the two champions I'll be working on. As you can see, the skin isn't that great, but it should be good for tabletop quality. Also, I'm planning on doing the armor with metallics since I don't want to attempt NMM at this point, especially not for the entire unit.

More later this week I hope. I've got a busy schedule this week, but I'm determined to finish at least one.

P.S. Changed the blog format template to a new one. How does it look? Or should I go back to the original template? The other one I liked is the one Brokenzealot uses, but I didn't want to completely rip him off. :D

The fixed width definitely seems to make the posts easier to set up with pictures!

Sunday, March 29, 2009

Back to the Trolls

So after that brief stint (brief being about 3 months...hah) of building 40k Orks, I've now got that out of my system and am again excited about working on my Trolls and with Warmachine/Hordes. I've also been listening to Fell Calls podcast again during my drive to and from school (about an hour drive both ways, so just about a full episode!).

I think for me the most truly difficult part is just getting started. I've been trying to get started again for the last week or so, but something always seems to come up. A group project, yard work, the need for sleep, job interviews, taxes (ugh! still not done yet....) etc. etc. I just need to get off my arse and get something painted. It's just tough when you don't get to play any games...that was always a good motivator for me to paint.

Even so, I'm going to paint one champion this week. He's had his skin done for a year or so now, but never got a good coat of armor and is still sitting in his black primer. Well no more! I'll aim to have him done by this Saturday (I hope). No doubt my painting skills have greatly deteriorated so I'm just going to shoot for tabletop quality and take it from there.

I'll post up a pic of how he looks currently tomorrow night.

Monday, August 11, 2008

Worked on the Extreme Mauler some last week

So I was able to finally finish building the Extreme Mauler sculpt yesterday. It took a ton of pinning work, lots of green stuff, and several hours, but he's finally put together. I've left him off the base because I want to paint the base separately first. Also, I still need to drill some pin holes for attaching him to his base.

This guy is a total beast. He has to weigh in at about a pound of pewter, and I pity anyone that had this guy drop on their foot!

I also worked on one of my Trollkin Champs, laying down some basecoating for his armor, leather, and weapons. It's been tough doing painting since I don't have a well lighted area set up yet in my house. I also don't have a modeling/painting table set up either, so I can only paint for very short periods before my back hurts too much from hunching over my coffee table. I'm not too happy with the results, so I'll probably improve it a bit before posting pictures.

Later this week I should have a table all set up though, so I should be able to paint for longer stints.

No pictures yet, but I will post some up tomorrow of the Extreme Mauler in all his unpainted (but assembled) glory!

Monday, July 21, 2008

I'm not dead yet!

So it's been, what, a measly 10 months since I updated this thing?

Yikes.

Anyway in that period of time I managed to:

1. Get into a MBA program.
2. Move out of state.
3. Quit my job.
4. Watch an amazing cancer recovery that my mother-in-law went through.
5. Get nothing modeling or painting done. At all. :)

But! Now that I'm settled in, I'm going to try to do a little bit of painting every week. Most likely no one reads this thing anymore so I'm doing these updates more for myself I suppose than anything, but it should be fun.

So picking up where I left off, I think I will be finishing up my Champions next. Let's see if I can still remember how to paint their skin...

Tuesday, September 25, 2007

Managed to do some painting and modeling

I was able to get some assembly work done this week on the Long Riders and the Extreme Mauler. The Long Riders are all done and assembled, but the Mauler still needs a lot of work. That guy is a beast! He must weigh about a pound.

I also did the skin on two troll champions. It went a lot more slowly than I thought because I've not done the skin for so long that I completely forgot how I normally paint it.

Even so, it was a ton of fun to get back into the painting/modeling groove. It was especially nice because I was able to paint with an old college buddy (who happens to be working on a GW Tomb Kings army). Painting with a buddy always makes it seem to go a lot faster and it's really nice to just relax on a Sunday afternoon and chat. The football game was also on in the background too for added entertainment.

It was really nice to catch up with my old buddy, and I got a lot done to boot as well! All in all quite a wonderful day.

Sunday, September 2, 2007

Hordes: Evolution - Quick Review

So I'm back from Taiwan now, been back for about a week. It was a pretty good trip; I got a lot of things done work-wise, the people there are great, and I enjoyed my stay there for the most part. While I'm glad I'm back to the US now, I will probably have to go back there again in a month or two.

A nice bonus that waiting for me at GameCastle was my preorder of the Hordes: Evolution book. I spent most of yesterday reading the fiction, which was quite a bit of fun. I really like how they advance the storyline with each new book they release. (No big spoilers for those that haven't read it yet, just general thoughts and impressions).

The Story

The trolls have carved out a little corner of Cygnar for themselves, but things are very tenuous and life is still hard for them. I really liked the way they expanded Alten's character as well as using him to explore Grim's character a bit. I found it interesting that they are making Doomshaper into a serious warmonger, trying to instigate a fight between the trolls and Cygnar. Not really much else of note on the troll story front though.

What I found the most interesting though was the legion fluff, in which they showed the "nicer" side of it, where Everblight is seen as a loving father rather than a crazy evil dragon, and all the warlocks are a sort of weird extended family. Very strange, but interesting nonetheless.

I didn't really like the Circle fluff much...it was all very political, and dealt with characters I'm not really interested in. I was pretty disappointed in Kaya's story progression though. She's just going to be used by Morvahnna now as a pawn. It was sad that she was too dumb to realize this. Oh well.

The Skorne story was pretty interesting in the parts that involved Magnus. The last part was especially interesting, and it makes me wonder what Zaal and Hexeris are up to, and what Vinter's master plan really is. Cool stuff.

The Art

The art throughout the book is very well done, and there's quite a lot of it. I like most of the new troll art, especially the full page picture of the keg carrier and his whelp. Circle art was pretty nice too, though since I'm not really interested in them, I didn't pay much attention though. I do think a lot of their new units looks pretty nice though. I especially like the wolves standard bearer and champion though, and the new Satyr heavy warbeast looks pretty cool.

Legion art was ok, nothing super special. Same with Skorne. The Agonizer art is even worse than the mini, so if the mini bothered you, then be prepared for the art. It's pretty gross looking. Other than that, it seems like more of the same for the Skorne.

The Troll Units

I'm sad that the trolls didn't get a pygmy bushwhacker UA, but happy that there is another pygmy miner unit. I'm definitely picking up a set of these guys as they seem really useful in scenario games and for claiming/contesting objectives. Plus popping out and dishing out a bunch of POW 14 slug gun shots to the face seems quite strong.

The troll bouncer light warbeast seems pretty useful. He's got decent power, great armor, and some nice defensive bonuses for having him near your warlock. Still, I'm not sure how I'd fit him into my army, especially my 500 pt. lists as he just doesn't seem quite good enough for me to want to replace my Axer in most cases. He might be more useful in 750, or maybe with Doomshaper and an Earthborn.

The best new unit/addition though has to be the new Standard Bearer, Musician, and Caber Tosser. These three guys make Kriel Warriors incredibly good. The standard bearer and musician make the Kriel Warriors tougher (tough on a 4+, unit members can't be knocked down) and faster (extra movement if not running, more spread out formation ok), while the caber tosser adds a much needed attack oomph to the unit. With the option to lay down 6" of pow 13 death, or a single target POW 20 hit, these caber tossers are brutal. Plus I really like the art for these guys and I hope the minis look cool too. I'm definitely going to be picking up a unit of Kriels once these additions come out.

Lastly, I've got mixed feelings about the new Solo, the Stone Scribe Chronicler. He's pretty much like the testament of menoth, where he has to read his special abilities in order. The bonuses are nice, but the order might cause some trouble. He's cheaper than the Fellcaller though, but doesn't quite seem as nice. Maybe in larger games he'd be a good addition, but I probably won't be getting one.

And of course there were all the guys covered by the previous NQ magazines (Earthborn, Long Riders, Grim, and Winter Troll). I'm definitely looking forward to some Long Riders soon. I think they should be out in a few weeks.

Which brings me back to painting. I really really need to get started again soon. I think my goal for next week will be to slam out the Champions, who have been sitting patiently in my army transport for months now, waiting their turn to get painted. I also want to get Borka assembled and primed for a game next week against Scott too. I'm sure he's sick of seeing Grim across the field. :)

So the week after will be Borka, and then maybe a break to paint the swamp gobbers or the Rhyas I got just to paint.

Wednesday, July 25, 2007

Grim Angus 95% Done

Ok, I know, I've been really bad about updating the blog with progress on my trolls. Sadly, the reason is that I just haven't made much at all lately. As some of my readers may know, I've been slammed with work and school.

For work I have to set up a whole new engineering team in the US and Taiwan. School sees me getting close to taking the GMAT exam. Anyway, all that in short = BLARG!

BUT! The bright news is that I'm now 95% done with painting Grim now! Woo! All that's left is his tartan, which I'm still undecided on how I want to paint it, and touching up a couple of boo-boos on his gun (there's a slightly messy highlight on the top of the scope that you can see in the closeup of the scope). I like his green goggles, the NMM work on his guns, and his pants and shirt.

Also, I managed to get a couple of Winsor Newton Series 7 brushes via a super sale online that Broken Zealot spotted and alerted me to. They would normally have sold for over $50, but I got them for only $20. As I understand, these are the Ferrari's of the mini paint brush world. Yea, ok that's super geeky, but whatever. :) I'm excited about using them sometime soon instead of the old GW brushes I've been using.

Back to Grim, here are some more pics of him as he is today (click to enlarge):

Monday, June 11, 2007

More Grim Angus Work

So I spent a couple more hours working on Grim tonight. I've finished off his goggles (boy what a huge pain that was...I kept messing up the gem effect...I must have done it 5-6 times). I also did the gold/copper metal on his guns. Lastly I finished his pants, the net refills, and his shoulder pads. I didn't really like how the shoulders came out though...I may redo them in the golden/copper color instead. I'm also thinking about redoing his bedroll.

I do think the gold/copper colors came out decently in the NMM style. I used a base of Snakebite Leather, and slowly worked my way up through Golden Yellow. For the very edges and tips I used half Skull White, half Golden Yellow for a very light creamy yellow color. I'll try and get a couple of pictures tomorrow hopefully when lighting is better.

All that's left now on him are his gloves and his kilt. I'm still not sure if I want to do a kilt or just make it cloth. Ah well, I'll decide that later...time for sleep.

Sunday, June 3, 2007

Grim Angus Gets Some Color



Here are a couple of quick shots of the work I've done on Grim Angus so far. I've finished off his cloak, skin, bandana, and most of the gun. I just need to change the scope clip to a bronze color and do the medallion. Also, I really like the olive green shirt color. It reminds me of military undershirts. I just need to give it a bit more shading so it looks nicer.

So there's not a lot left to do for him. I'm not sure what color to paint his pants though...and I think I may change his backpack colors...it looks too weird with the beige and red/brown. I also don't like how his sleeping roll looks now that I've seen it on photo. Then it's just gloves, net gun, boots, and shoulderpads. He's a ton of fun to paint too because there's all sorts of things on the model that require different styles/skills. For example, while he has a lot of leather, he's still got troll skin, metal pieces on his weapons, cloth shirt/pants/bandana, glass/gems on his rifle and goggles, etc. I'm hoping he'll be done by this time next weekend or sooner.

I'm also going to get someNMM bronze/copper going on his gun and shoulderpads.

Hopefully with a finished paintjob he'll start doing better in games. :)

Oh, by the way, I tried to make his scope have the reddish-orange reflection found in a lot of sniper scopes these days. Here's the reference photo I used:

Saturday, June 2, 2007

Grim Angus...don't go where he goes...there's only death there...

So I played another game with Grim today against a Harbinger heavy infantry list. Oof. I think I did a lot worse in this one than the last game. The hordes of Menite infantry totally overran my lines. Most of my beasts were totally ineffective, Alten couldn't hit anything, and the Champions got munched by Vilmon. All in all, it was a really poor showing for Grim and his warband.

The Pyre troll (which I proxied) was kinda neat...but in the end he didn't really do all that much. I didn't really need the animus at all (no jacks to attack) and his flame breath was only mediocre. This army is really giving me fits...I'm just not sure how to play it correctly...either that or Grim just isn't meant to go up against Menoth. :)

Anyway, I'm not gonna give up on him yet...I'm hoping eventually I'll be able to figure something that works. If I can make it to my normal game next Wednesday, I'd like to give my Menoth box set a go for a change of pace. It's been sitting here in my army box for years...should be well aged enough to play. ;)

In other news, folks on the forums seem to like how my Axer came out! I think I'm improving my painting skills slowly but surely, and it's nice to see folks liking how he looks. I just need to deepen some of his shadows, fix some boo boos, and I'm going to call him done. I thought about doing some bronze/copper armor pieces...but I don't want to mess him up...so he'll be the meticulous troll...always keeping his armor nice and shiny.

What I will try though is some bronze/copper armor on Grim's shoulder...that's suitably small enough to experiment on without needing a lot of effort...plus if I mess up, I just paint it black and start over...it's easy at this point since I've only finished his skin so far.

Tuesday, May 29, 2007

Finished Trollblood Axer Photos

Here's my finished Axer. But as usual I've found several problems with him after examining the big photos. There's several places where the blending just isn't smooth enough. I've also decided that I don't really like how the axe came out.

Lastly, I don't really like how his bracers and his neck guard look. The bracers are not shaded enough and are too washed out while I think the neck guard transition from light to dark is too fast and so doesn't really look natural.

I've definitely learned a ton about painting NMM (non-metallic metal) from this guy. Honestly though, I don't think I'm going to be doing NMM on such a large scale anymore. It was just super time consuming, even frustrating at times. The end result I think is not bad for a first real attempt, but I think I could do an even better job with just regular metallics.











I will still probably do some NMM on models that don't really have a lot of metallic parts though...just not fully armored guys. (E.g. I'll be doing some NMM work on Grim Angus' gun barrel and nick-nacks).

The good thing about this whole process though is that I feel it will really help me to shade and highlight better and more naturally. Highlighting skin, leather, etc. all seems tons easier to do now that I've tried out NMM.